© 2017 by Oman Aluminium Cast LLC.

    STRATEGICALLY LOCATED TO SUPPLY QUALITY BUSBAR & SPECIALIZED ALUMINIUM PRODUCTS TO THE WORLD.


    مصنع عمان لصب الألمنيوم متخصص فـي صـنـع قـوالـب الألـمنيوم المخصـصة لـنـقل التيارات الكهربائية عالية الجهد المستخدمة في خـطوط الإنـتاج فـي مـصـاهر الألـمنيوم العالمية

    THE PLANT

    Oman Aluminium Cast Furnace
    FURNACES

    OAC is equipped with two 50-ton holding and melting furnaces.

    Oman Aluminium Cast Horizontal Direct Chill Casters manufactured by HPI in Austria
    CASTERS

    OAC operates 2 Robust Horizontal Direct Chill Casters manufactured by HPI in Austria.

    Aluminium Long busbar busbars ALBA line 6
    PRODUCTS

    OAC can produce a wide range of Busbars, PFA Ingots, Bars and Plates.

     

    ABOUT

    Oman Aluminium Cast LLC (OAC) is a specialized Aluminium horizontal Cast house designed to produce high current bus bars required by Aluminium smelters and other electrolysis plants. Our Cast house is one of its kind present in Middle East and South-East Asia.

    The Casthouse was incorporated in 2016 and commercial production started in February 2017. The company is owned by the Lefebvre Engineering Group and two highly esteemed Omani business men. Lefebvre Engineering has a rich experience in the aluminium industry for more than 50 years.

     

    Products and Capabilities

     

    Aluminium Busbars

    OAC has two horizontal casters which are capable of casting maximum cross sections as given in the table below:

    As well as a wide range of existing mould sets, OAC can offer a mould design & fabrication service and has a direct link to a machine shop for any specific or precision sizes/shapes a customer may require. The following table is a list of readily available mould cross sections:

     

    OAC has two horizontal casters which are capable of casting maximum cross sections as given in the table below:

    Busbars are generally produced according to one of two chemical compositions, with accordingly low Hydrogen content (quantified by Density Index – DI) and superior electrical conductivity (measured by IACS). Specific customer chemical compositions can be evaluated at time of request.

    Standard product specifications for our busbars are available on request.

    Aluminium Foundry Alloys:

    OAC also produces small horizontally cast ingot for remelt with particular focus on “specialized” foundry alloys for the automotive markets.

    Due to our supply of superior liquid aluminium and HDCC casting process, alloys can be offered with very low Iron (Fe) and impurity contents, and depending on customers remelting technology, an improved yield of 1-2% (*) can be achieved compared to standard ingots due to reduced burn-off and dross.

    (*) Proven by experience of customers.

    OAC small ingots have a cross section of 92.3 mm x 47.8 mm , with foot ingots of 92.3 mm x 92.3 mm, which are placed to the outermost position for bundle stability and to allow maximum entry width for fork-lifts. The ingots are cut to a standard length of 716 mm (minimum length due to machine capability) giving an ingot weight of ≈ 8.5 Kg, and a foot ingot weight of ≈ 17 Kg. The bundles are stacked to 7 layers high giving a bundle weight of ≈ 925 Kg.

     

    As stated, the focus is on the production of “specialist” primary foundry alloys, with the table below listing some of the alloys being cast on a regular basis, although any desired specification on primary alloys can be offered up to hypereutectic AlSi alloys, plain or refined with Na or Sr.

     

    Certifications

    Oman Aluminium Cast operates under an Integrated Management System (IMS) and achieved accreditation to the following standards in March 2018:

    ISO  9001 : 2015,  ISO  14001 : 2015, and OHSAS 18001 : 2007.

     

    CLIENTS

    Oman Aluminium Cast ( OAC ) and Lefebvre Engineering ( LEF ) are working together as an EPC for busbar projects. The quality of their products is well appreciated from all of their clients
     

    Achievements

     
     

    CONTACT

    Inquiries

    For any inquiries, questions or commendations, please call: +968 266 43726

    or send an email to: info@oac.om

    or fill out the following form

    Head Office

    Plot No 605, Phase-06,

    Postal Code 327, PO. Box No-90,

    Falaj Al Qabail, Sohar Industrial Area

    Sultanate of Oman

     

    info@oac.om

    Tel: +968 266 43726

    Employment

    To apply for a job with Oman Aluminium Cast, please send a cover letter together with your C.V. to: info@oac.om

    Get a quote: +968 266 43726
    First crucible delivery from SA

    First Liquid metal (Crucible) delivery from Sohar Aluminium to Oman Aluminium Cast